Deskterior PC Case

Unobstructed View
D40 Dual-Chamber Panoramic Design

A frame-less panel design eliminates visual barriers, delivering

a clean and open view.

Seamless integration between the front and side panels ensures a perfect system display from any angle.

The front and side tempered glass panels feature

a ball-head push-pin mechanism, allowing quick

and easy detachable for maximum convenience.

Minimal I/O Layout with Essential Ports

① Power Button

② Reset Button

③ Microphone, Headphone Jack

④ USB Type-C(20Gb)

⑤ USB 3.0

8-Degree sloped bottom design

to maximize airflow

The 8-degree sloped bottom intake system optimizes incoming

cold air by splitting it into two pathways.

When the GPU cooler is idle, external air which would

otherwise stall at the bottom due to the GPU

blockage is divided into two channels.

One stream delivers immediate fresh air to the graphics card.

And the remaining airflow is guided sideways,

bypassing the GPU via the Coanda Effect

and ascending toward the CPU and VRM to form 3D airflow

Side Air Intake for Enhanced Airflow

Optimized Side Airflow Design

Perforated side intake supports fan and PSU ventilation,

while the air vent enhances smooth and efficient cooling.

Coanda Effect Bottom Intake &

Surround Airflow System

• Sloped Bottom Intake ( 3x ARGB Fans Pre-installed)

  The 8-degree sloped bottom intake system optimizes   

  incoming cold air by splitting it into two pathways.

• Side Intake (3x Reverse ARGB Fans Pre-installed)

   Pre-installed Reverse side intake Fans rapidly pulls fresh

   external air directly into the system.

• Rear Exhaust (1x ARGB Fan Pre-installed)

  Pre-installed Rear ARGB fan expels internal heat and provided   

  seamless lighting aesthetic with motherboard sync.

• Top Exhaust (Up to 360mm Radiator Support)

  Equipped with top exhaust holes supporting up to a 360mm

  radiator, efficiently expels heat from the upper chassis.

Pre-installed 7 X ARGB Fans!

Max. 10 X Fans support!

Side(ARGB Reverse Fan)

Model  ZS1225BESH-SLD

Voltage  12V⎓0.2A

Bearing  Hydro Bearing

Bottom(ARGB Reverse Fan)

Model  ZS1225BESH-SLD

Voltage  12V⎓0.2A

Bearing  Hydro Bearing

Rear(ARGB Fan)

Model  ZS1225BSH-SLD

Voltage  12V⎓0.2A

Bearing  Hydro Bearing

Equipped with 7 pre-installed fans

Pre-installed Reverse-blade intakes on the side/bottom and an exhaust at the rear delivers an 

powerful  cooling system

And  providing seamless lighting aesthetic with

motherboard sync.

Comes with a PWM & ARGB Fan Hub

Managing your PWM and ARGB connectors through this

all-in-one hub for convenient cable management

*How to use ARGB controller
- Change Lighting Modes

 Press the I/O LED (Reset) button to switch between

28 color modes and patterns.

- Motherboard Sync

 Press and hold the button for 3 seconds.

The white LED will blink once

 to indicate it has synced with the motherboard.

- LED OFF

 Press and hold the button for 3 seconds.

The white LED will blink once,

 and then twice after another 3 seconds

to turn the LED OFF.

- Return to Controller Mode

  Press the button again to disconnect from motherboard sync

  and return to the controller's default patterns.

① LED control with Reset connector

② PWM Signal Connector

The PWM signal is controlled based on

the RPM reading of the fan connected

to this header.

Support for Powerful Cooling System 

Support  360mm Radiator on Top

Equipped with top exhaust holes supporting up to a 360mm  

radiator, efficiently expels heat from the upper chassis.

Support 120mm  Radiator on Rear

Supports a 120mm liquid cooler at the rear, allowing for

a triple-radiator configuration in custom water-cooling builds.

Support Max 10 X Fans 

Pre-Installed

Side : 3 x 120mm Reverse

Bottom : 3 x 120mm Reverse

Rear : 1 x 120mm

Support

Top : 3 x 120mm

Side : 3 x 120mm

Bottom : 3 x 120mmm

Rear : 1 x 120mm

Radiator Support

Top : 120mm / 240mm / 360mm

Rear : 1 x 120mm

Clean System Management

Magnetic dust filters on the top, Side and bottom effectively

minimize dust buildup while enabling rapid heat dissipation

during operation.

Keep your system clean effortlessly with the built-in dust filter.

Motherboard Supports

Excellent Expandability

and Easy Installation

Max CPU Cooler Height

160mm

Max VGA Card Length

410mm

Drive bays

1 x Combo(2.5'' or 3.5''), 1 x 3.5''

Flexible System Configuration

with Additional HDD Support

Includes an HDD cage for easy system expansion

and added convenience.

GPU Support Bracket Included

A built-in GPU support bracket prevents graphics card sag

for enhanced stability.

Ample Installation space

for large-sized- PSUs

Supports up to 180mm PSUs, ideal for full modular

power supplies.

And operates independent cooling system.

Max PSU Length: 180mm

Effortless Cable Management
Optimized Cable Routing Design

Strategically placed cable routing holes enable clean cable

management and an optimized system interior.

Rear Design

① Side Panel Screws

② HDD Mounting Screws

③ Rear 120mm  Fan x 1 (Pre-Installed)

④ PSU Mounting Area

⑤ Rear Mesh Panel

⑥PCI Slot (7)