본문 컨텐츠 영역
PC CASE
Showcase Build Aesthetics with
a Stunning Design
The P40 Prism, with three tempered glass panels,
creates an open feel and enhances your
system build with its modern design
Premium Tempered Glass Panel
Using 4mm thick tempered glass, P40 Prism offers
exceptional durability.
Unobstructed Panoramic View with
3-sided Tempered Glass
A new paradigm in design eliminates the chassis frame, providing an open feeling and unobstructed view.
Tempered glass panels across the front,
sides, and top create a seamless look.
Tool-Free Tempered Glasses
The Front, Side and Top panels can be easily and
completely removed for convenient access to
PC components.
- Top Glass panel Thumb-Screw
- Easy panel management with groove fixing structure at the bottom of the tempered glass
- The new type of conical, tool-less fixing mechanism allows for convenient panel attachment and detachment and is not easily dislodged by normal impact.
Sturdy Triangular Support Structure
The sturdy triangle fixing structure of tempered glass is
able to support a load of 35kgs, ensuring solid stability
for all three glass panels
Full-Mesh Side Panel for
Optimal Airflow
Full-Mesh Side Panel exhaust vent above the
motherboard for optimized airflow.
Extended Bracket
(HDD, SSD, Fan Support)
HDD / SSD
3 x Combo(3.5'' or 2.5')
Additional fans can be installed to dissipate heat
from the rear of the motherboard.
Side : 120mm/ 240mm / 360mm
Rear : 120mm
Rotating PCI slot for GPU
Installation Direction
(Vertical/Horizontal)
[Vertical Mounting] [Horizontal Mounting]
Detachable Expansion Cover Available
The expansion cover can be removed to accommodate
the installation of a 360mm liquid cooler.
Efficient Cable Management
with Optimal Routing Design
33mm cable management space helps keep
wires organized.
Convenient cable management layout and
space makes it easier than ever to organize
messy cables for a clean look
Easy Accessible I/O ports
ⓐ USB 3.0
ⓑ Microphone / Headphone Jack
ⓒ USB Type-C
ⓓ Reset Button (LED Control Button)
ⓔ Power Button
Rubber Grommets
for Clean Cable Management
Convenient cable management layout makes it easier
than ever to organize messy cables for a clean look.
Vibrant ARGB Lighting Effect
Stunning and bright ARGB colors shine through the
AF120 presenting your build in the most beautiful
light possible.
Rear : ZM-AF120 ARGB PWM
- Dimensions : 120 x 120 x 26(T)mm
- Rated Voltage : 12V DC (LED: 5V)
- Fan Speed : 600~1,500 ± 10%
- Air Flow : Max. 53.72CFM
- Bearing Type : Hydro Bearing
- Connector : 4-Pin(PWM) / LED 3-Pin(5V)
1. The blade vibration is minimized by preventing the
trembling of the blades during fan operation and the
durability is enhanced
2. Wind noise is minimized by suppressing the vortex
phenomenon that occurs on the blades
3. Airflow is maximized by minimizing the amount
of air flow lost to the outerncircumference
of the rotor
ARGB Controller
RGB control hub and top control button enable variety
RGB effects.
Connect to motherboard 5v RGB pin header to create
various RGB modes.
※ How to use ARGB controller
- Press the I/O LED button to change the LED pattern and color.(26 patterns)
- Press and hold the LED button for 3 seconds to sync the motherboard after the white light flashes once.
- Press and hold the LED button for 6 seconds to turn off the LED after the white light flashes twice.
- Press the LED button again to disconnect the
motherboard sync and change the controller mode.
Dedicated GPU Bracket Included
[EVA Foam ]
Bottom Magnetic Dust Filter
Complete Dust Protection
Motherboard Support
Max CPU Cooler Height : 165mm
Max VGA Card Length : 420mm
MAX PSU Length : 150mm
Radiator Configuration
Side : 120mm/ 240mm / 360mm
Rear : 120mm
Fan Support
Rear : 1 x 120mm / Bottom : 3 x 120mm
Side 1 : 3 x 120mm / Side 2 : 2 x 120mm
Rear Layout
1. Rear ZM-AF120 ARGB Fan x 1
2. PCI Slot x 7
3. Tool-Free Top cover handle
4. PSU Slot
| Model | P40 PRISM BLACK |
|---|---|
| Case Form Factor | ATX Mid-Tower |
| Materials | Steel, Plastic , Tempered Glass |
| Weight | 8.9kg |
| Dimensions | 452(L) x 235(W) x 495(H) mm |
| Motherboard Support | ATX / mATX / Mini-ITX |
| Fan Support | Side 1 : 3 x 120mm
Side 2 : 2 x 120mm Rear : 1 x 120mm Bottom : 3 x 120mm |
| Fan(s) Included | Rear : 1 x 120mm
(ZM-AF120 ARGB Fan) |
| Radiator Support | Side 1 : 120mm / 240mm / 360mm
Rear : 120mm |
| Max. PSU Length | 150mm |
| Max. VGA Length | 420mm |
| Max. CPU Cooler Height | 165mm |
| Drive Bays | 3 x Combo(3.5'' or 2.5')
(Only two combos can be used if you have two fans mounted on the side no. 2.) |
| PCI Expansion Slots | 7 pcs |
| I/O Ports | Power, Power LED, Reset,
1 x USB Type-C, HD Audio, 2 x USB 3.0 |
