Front mesh panel and RGB fans provide

optimal  airflow and stunning

ARGB lighting effects

Front mesh panel and RGB fans provide optimal airflow

and stunning RGB lighting effects

(Support up to 8 Fans)

High Cooling Performance

Designed for optimal Air Intake with Air Holes

at the Front Bezel

Easy accessible design on top I/O ports

ⓐ  Power ⓑ Reset ⓒ HDD / Power LED

ⓓ Microphone Jack ⓔ Headphone Jack

ⓕ USB 2.0 Port ⓖ USB 3.0 Ports

Top magnetic dust filter

Protects your components and provides unobstructed airflow through dust filtration

Bottom dust filter

Protects your power supply from piling up dust

Edgeless Premium
Tempered Glass Side Panel

An edgeless premium tempered glass side panel of 3mm provides a panoramic view of your system

Hinged glass panel provides easy interior access by simply unscrewing thumb screws

Maximum Airflow and Ventilation

4 pre-installed 120mm ARGB fans (Front x 3, Rear x 1)

provide quick heat dissipation from the case

and up to 8 fans can be supported

Professional Cable Management

Easily route your major cables through the case

A professional-looking system with a roomy 20mm of space

behind the motherboard for all of your cables

ATX / mATX / Mini-ITX

Radiator Configuration

Front : 120mm / 240mm / 280mm / 360mm

Rear : 120mm

Top : 120mm / 240mm

Fan Capacity

Fan Support   

Front : 3 x 120mm / 3 x 140mm

Rear : 1 x 120mm

Top : 2 x 120mm / 2 x 140mm

Bottom : 2 x 120mm

Pre-installed Fan   

Front : 3 x 120mm (ARGB) 

Rear : 1 x 120mm (ARGB)

Maximum Airflow and Ventilation

4 pre-installed 120mm ARGB fans (Front x 3, Rear x 1) and optimized ventilation providing fast heat dissipation in the case (Supports up to 8 fans)

Fan Specifications

• Dimensions : 120 x 120 x 25(T)mm

• Bearing Type : Hydro Bearing

• Max Fan Speed : 1,100 RPM ±10%

• Max Airflow : 45.36 CFM

• Max Noise Level : 21.65 dB(A)

• Life Span : 40,000 hours

ARGB CONTROLLER

RGB control hub and top control button enable variety

RGB effects. Connect to motherboard 5v RGB pin

header to create various RGB modes.

※ How to use ARGB controller

-  Press the I/O LED button to change the LED pattern

and color.(26 patterns)

-  Press and hold the Led button for 3 seconds to sync

the motherboard after the white light flashes once.

-  Press and hold the Led button for 6 seconds to

turn off the LED after the white light flashes twice.

-  Press the LED button again to disconnect the motherboard sync and change the controller mode.