 |
|
| Dimensions |
70(L) x 26(W) x 26(H) mm |
| Weight |
20g |
| Output Voltage |
5V ~ 11V ± 2% |
| Allowable Power |
6W or lower |
| Connector |
3-Pin |
|
| |
 |
 |
 |
Connect FAN MATE 2 (adjustable fan speed connector)
to the 3-pin connector of a fan as shown in Figure 1.
|
|
 |
Connect FAN MATE 2 to the 3-pin CPU fan connector of
the mainboard. |
|
 |
Turn on the computer after assembly is finished. |
|
 |
When the speed control knob is turned fully counter-clockwise,
the fan speed is minimum, and the fan operates in silent
mode. You can select the desired fan speed by turning
the knob. |
When booting a computer in which FAN MATE 2 is used with the
CPU fan, an alarm sound may be generated by a system monitoring
program to indicate that the rotation of the CPU fan is slow.
If this happens, you may turn the speed control knob fully clockwise
to increase the fan speed, set 'CPU Fan Detected' to 'Disabled'
in the BIOS settings, or set the slowest rotation of the CPU
fan in the system monitoring program to less than or equal to
1500 RPM.
* Some mainboards do not boot if the rotation of the CPU fan
is below a certain number of RPM. If the BIOS settings are updated,
Silent Mode can be used. For more information on updating your
BIOS , please refer to your mainboard manufacturer's web site.
|
|
|
| |
 |
| Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components
used for noiseless computers. |
| |
 |
|
Please check the allowed wattage of the CPU fan connector on the
motherboard, as well as the rated wattage of the fan to be used. |
|
|
Zalman Tech. Co., Ltd. is not responsible for any damage to systems
or CPUs caused by using the product outside of its specifications.
|
|
|
Do not use FAN MATE 2 with fans that have a start up voltage of
more than 5V. Please check the start up voltage in the specifications
of the fan. |
|
|
The specifications of any product may change without prior notice
to improve the performance thereof. |
|
