 |
| |
 |
Socket |
|
CPU |
|
Automatic Fan Control |
|
Compatible Motherboard |
|
| Intel |
1155/1156 |
Core i7 |
Supports all speeds |
- |
| Core i5 |
| Core i3 |
| 1366 |
Core i7 |
Supports all speeds |
|
| 775 |
Core 2 Extreme |
Supports all speeds |
- |
| Core 2 Quad |
| Core 2 Duo |
| Pentium D |
| Pentium 4 |
| Celeron D |
|
| |
 |
|
 |
|
| Dimensions |
85(L) X 112(W) X 125(H) mm |
| Weight |
530g |
| Base Material |
Pure Copper |
| Dissipation Area |
3,698㎠ |
| Thermal Resistance |
0.12°C/W ~ 0.16°C/W |
|
| |
 |
|
| Bearing Type |
2 Ball-Bearing |
| Speed |
1,300rpm ± 30% ~ 2,650rpm ± 10% |
| Noise Level |
18.0dBA ± 10% ~ 27.5dBA ± 10% |
| Input Voltage |
12V |
| Main Function |
PWM Control Function and Auto Restart Function
|
|
| |
 |
 |
Compatible with Intel`s Dual Core Pentium, Pentium4,
and Celeron D for Socket 775. |
|
 |
Low-noise 92mm PWM Control fan for automatic control
of the fan`s RPM according to CPU temperature. |
|
 |
Optimized heatsink layout composed of pure copper for
maximum heatsink efficiency. |
|
 |
Innovative, patented, and curved heatpipe design for
a heat transfer capacity of up to six heatpipes with just
three. |
|
 |
0.2mm ultra-slim fins for minimized weight and reduced
airflow resistance. |
|
 |
Maintains minimum RPM even when Duty signal supplied
by M/B is below 30%. |
|
 |
Operates in silence by preventing extreme RPM during
initial booting. |
|
|
|
| |
 |
 |
- Cooler (CNPS9500 AT)
- Thermal Grease (ZM-STG2M)
- Clip Support
- Clip Support Fixing Bolts
- Clip
- Washers
- Nuts
- Clip Fixing Bolts
- User`s Manual |
|
|
|
| |
 |
| Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components
used for noiseless computers. |
| |
 |
|
Korean Patent Application No. 05-45737 |
|
|
Korean Design Applications No. 05-15303, 15304, 15306, 15307, 17970,
17971 |
|
|
Patent applications pending in over 20 nations around the world
including USA, EU, and Japan. |
|
| |
 |
|
Maximum weight specified for a cooler is 450g
for Intel Socket 775. Special care and attention must be taken
when moving a computer equipped with a cooler exceeding the specified
weight limit. Zalman Tech Co., Ltd. Is not responsible for any damage
that occurs when moving a computer. |
|
|
If excessive force is exerted on the fan, it may result in malfunction
or damage to the product and/or the computer. |
|
|
Avoid inserting any objects into the fan while operating. |
|
|
Check the components list and condition of the product before installation.
If any problem is found, contact the place of purchase to obtain a
replacement/refund. |
|
|
Zalman Tech Co., Ltd. is not responsible for any damages arising
from using the product outside of its intended purpose. |
|
|
CPU and motherboard are subject to damage if the product is incorrectly
installed. Familiarize yourself with the “installation” steps before
installing the product. |
|
