Solid Capacitors for Reinforced Stability   Solid Capacitors, which have a longer lifespan and lower ESR*, compared with electrolytic capacitors, are incorporated for maximum reduction of output ripple noise and ultra stable operation. * ESR (Equivalent Series Resistance).   Heat-pipe Installed for Maximum Cooling Performance and Ultra Quiet Operation   An ultra high performance heat-pipe incorporated on the power supply’s main rectifiers enables high load operation even at low RPM for a dramatic reduction in noise levels.   80 PLUS® BRONZE Certified High Efficiency Design This power supply is 80 PLUS® Bronze certified with 82% minimum / 88% maximum efficiency(230VAC, Typical Load) incorporating a high switching frequency & low power-loss circuitry design, and guarantees higher efficiency compared to uncertified products. ※ 80 PLUS® is an energy efficiency certification program administered by Ecos Consulting of the U.S.A.   Flexible Modular Cables   Slim and flexible modular cables facilitate simplified cable management and optimal airflow through the computer enclosure for increased cooling performance.   Four Independent +12VDC Rails   Four +12VDC rails supply power independently to the CPU, VGA, motherboard, and peripherals for stable operation of core components.   Dual Graphic Cards Support 6-Pin and 6+2-Pin PCI-E connectors are provided for dual graphic card setups.   Ultra Quiet 140mm Fan   An ultra quiet 2 Ball-Bearing cooling fan increases airflow while minimizing noise for a superb ultra quiet computing environment.   Wafer Bridge for Reinforced Cooling Performance   Unlike conventional modular PSUs that utilize bulky wires to connect the main and modular circuit boards, a compact wafer is utilized, enhancing internal airflow and cooling performance.   Supports ATX12V CPU 4-Pin and EPS12V CPU 8-Pin   Two ATX12V CPU 2ⅹ2(4-Pin) power cables can be combined to form an EPS12V CPU 8-Pin power cable.   EZ-Grip Connectors for ODD/HDD   EZ-Grip Connectors are incorporated for easy attachment and removal of plugs.   Gold-Plated Terminals   All connector terminals are gold-plated to minimize power loss.   Multiple Safety Features for the Highest Level of Safety   Over-Voltage Protection, Over-Current Protection, Short-Circuit Protection, Under-Voltage Protection, and Over-Temperature Protection features protect the system from potential electrical hazards.   High Intensity Blue LED Blue LEDs are installed inside the power supply for cool aesthetics.   Active PFC for Improved Power Factor & Reduced Harmonics By implementing Active PFC(Power Factor Correction), instead of Passive PFC with a Power Factor(PF) of 75%, the PF is improved up to 99% while harmful harmonic frequencies are reduced to meet the Line Harmonic Distortion Requirement of EC61000-3-2 Class D.   WEEE & RoHS Complies with WEEE & RoHS environmental directives of the European Union. - WEEE (Waste Electrical and Electronic Equipment) - RoHS (Restriction of Hazardous Substances)   International Safety and EMC Certifications

Output Power Cable Specifications   [Cable Types and Functions]         [Dual-Connector (ZM-DC1) Components]       Electrical & Physical Characteristics   AC Input Range Voltage 100VAC ~ 240VAC ±10% DC Output Frequency 50Hz~60Hz Output V. Output Load Rating Combined Power AC Input Current (Rated) 115VAC 11A Imin Imax Ipeak 230VAC 5A +3.3V 0.8A 30A 35A 160W 770W PFC Type Active PFC +5V 0.5A 30A 35A Power Factor 99% Maximum +12V1 0.5A 20A 22A 720W Inrush Current Limit (@ Cold start at 25°C) 115VAC 80A +12V2 0.5A 20A 22A 230VAC 60A +12V3 0.5A 20A 22A Efficiency 88% Maximum @230VAC, Typical load +12V4 0.5A 20A 22A DC Output Voltage Regulations Output V. Regulation Range At Full Load -12V 0.0A 0.8A   22.1W +3.3VDC ±5% +3.14V~+3.47V +5VSB 0.1A 2.5A 3.5A +5VDC ±5% +4.75V~+5.25V Protection Features +12V1DC ±5% +11.4V~+12.6V Over Voltage Protection(OVP) +12V2DC ±5% +11.4V~+12.6V Over Current Protection(OCP) +12V3DC ±5% +11.4V~+12.6V Short Circuit Protection(SCP) +12V4DC ±5% +11.4V~+12.6V Over Temperature Protection(OTP) -12VDC ±10% -10.8V~-13.0V Under Voltage Protection(UVP) +5VSB ±5% +4.75V~+5.25V Ambient Temperature DC Output Ripple & Noise Output V. Specification At Full Load Operation 0°C ~ +40°C +3.3VDC 50mV Storage -20°C ~ +80°C +5VDC 50mV Ambient Humidity +12V1&2DC 120mV Operation 5%RH ~ 95%RH +12V3&4DC 120mV Storage 5%RH ~ 95%RH -12VDC 120mV Dimensions +5VSB 50mV 180(L) x 150(W) x 86(H) mm

- 1 x Power Supply - 1 x PCI-E2(6+2pin) Cable - 2 x ODD/HDD Cables - 4 x S-ATA Cables - 1 x FDD Cable - 1 x Fan Dual-Connector (ZM-DC1) - 7 x User's Manual - 5 x Cable Ties - 4 x PSU Installation Screws - 1 x AC Power Cord (not included in certain countries)

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

Plugging the main power connector P1 into the motherboard while the product is connected to the AC power source may result in damage to the motherboard. Make sure that the connectors are connected to their designated locations, and that the connectors are not oriented in the wrong direction when connecting the DC output connectors. If the Power On light fails to light up when the main power button is pressed after completing the installation procedure, then some devices may be plugged in incorrectly or the motherboard may be faulty.