• PRODUCTS

FX70
Fanless CPU Cooler
Fanless Design
FX70 is designed to utilize natural convection and bring the cooling performance to the maximum.
Minimized factors that influence the damage of electronics such as vibration, dust, to extend its life span.
Twist Heatsink Design
Twist heatsink design maximizes airflow.
High Durability
The FX70 is the perfect cooling solution at places where noise, dust,
and vibration can be detrimental to the system and its surrounding areas.
6High Performance Heatpipes
Optimized heat transfer performance with 6 heatpipes applying
Black-pearl nickel plated heatsink
Anti-corrosion , elegant black pearl nickel plated heatsink.
Wide Compatibility
Fits in ATX mid tower case (Width 180mm) and compatible with most CPU sockets
ZM-STG2M provided
High Performance Thermal Grease (ZM-STG2M) maximizes adhesion and cooling performance.
Mount extra fan at the front or back.
Use with no noise or low noise according to the system.
(Fan clip provided for only one fan mounting.)
Contents
International Safety Certifications
※ Test environment : PC case equipped with one system fan.
Socket CPU CPU Compatibility
Intel 2011 Core i7 Extreme Supports all speeds
(Optional 120mm fan installed)
Core i7
1155/1156 Core i7 Extreme Supports all speeds
Core i7
Core i5
Core i3
Pentium
Celeron
1150/1151 Core i7 Supports all speeds
Core i5
1366 Core i7 Extreme Supports all speeds
(Optional 120mm fan installed)
Core i7
775 Core 2 Quad 95W or lower
Core 2 Duo
Core 2 Extreme
Pentium Dual Core
Pentium D
Pentium 4
Celeron D
AMD FM1 LIano 95W or lower
FM2 Trinity 95W or lower
AM3+ Vishera 95W or lower
Zambezi
AM3 Phenom II 95W or lower
Athlon II
Opteron
AM2+ Phenom II 95W or lower
Phenom
Athlon FX
Athlon X2
Athlon
Sempron
Opteron
AM2 Athlon FX Supports all speeds
Athlon X2
Athlon
Sempron
Opteron
Dimension
110(L) x 140(W) x 158(H)mm
Weight 530g
Material Pure Copper and Aluminum
Noise Level 0 dBA
Capacity 1g
Thermal Grease(ZM-STG2M) -40°C ~ +150°C (-40℉ ~ +302℉)
Avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries.
Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention.
To prevent possible injuries, gloves must be worn while handling this product.
Excessive force exerted on the fan may cause damage to the fan and/or system.
Use and keep product away from reach of children.
Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
During transportation of the system, the cooler must be removed.
Zalman is not responsible for any damages that occur during the transport of a system.
Product design and specifications may be revised to improve quality and performance.
Enable PWM function in BIOS settings after installation.
Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
Liquid metal thermal grease unlike the normal thermal grease it contains electrical conductivity and causes aluminum cooler to rust therefore please avoid using it. Corrosion and short circuits caused by using aluminum cooler are users' responsibility, so please read this carefully before using. (EX: Liquid Pro, Liquid Ultra etcs)