Ultra Quiet CPU Cooler
Honeycomb fin design
Optimized the angle with honeycomb fin, helps to increase the airflow , minimize the noise.
Optimized heat dissipation structure
Down blowing type design Through emitting the air straight from the fan to the mother board, it cools down not only the CPU but also the components around it.
Minimized noise 92mm FSB fan
One of the Advanced Sleeve bearing FSB Fluid Shield Bearing) applied to prevent dust and strong cooling performance with 92mm fan with minimized noise.
Shark Fin Blade Fan applied
Shark fin blade helps to reduce the turbulence generated while the turning of the fan, which helps to reduce noise and vibration, at the same time increases the air flow.
Compact light design
60mm high, small enough to mount into LP(Low Profile) case, perfect for home theater PC, with weight only 240g.
Easy installation
Wide compatibility and easy installation.
Manufacturer Socket CPU CPU Compatibility
Intel 1156 Core i7 Supports all speeds
Core i5
Core I3
1155 Core i7 Supports all speeds
Core i5
Core i3
1151 Xeon E3 Supports all speeds
Core i7
Core i5
Core i3
1150 Xeon E3 Supports all speeds
Core i7
Core i5
Core i3
AMD AM4 Ryzen 7 Supports all speeds
(Socket AM4 mounting kit Inquiry)
Ryzen 5
Ryzen 3
AM3+ FX Supports all speeds
AM3 PhenomⅡ X6 Supports all speeds
PhenomⅡ X4
PhenomⅡ X3
AthlonⅡ X3
AthlonⅡ X2
FM2+ A10 Supports all speeds
Athlon X4
FM2 A10 Supports all speeds
AM2+ Phenom X3 Supports all speeds
AM2 Athlon64 X2 Supports all speeds
Dimensions 116(L) x 112(W) x 60(H)mm
Weight 240g
Base Material Pure Aluminum
Fan Size 92mm
Bearing Type FSB (Fluid Sheild Bearing)
Fan RPM 2300rpm ±10%
Fan Noise 29dBA
Connecter 3-Pin
※ Please use Fan Mate 2 to change the fan speed..
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
Avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries.
Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention.
To prevent possible injuries, gloves must be worn while handling this product.
Excessive force exerted on the fan may cause damage to the fan and/ or system.
Use and keep product away from the reach of children and pets.
Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
Zalman Tech Co., Ltd. is not responsible for any damages due to overclocking.
Before transportation of the system, the cooler must be removed.
Zalman is not responsible for any damages that occur during the transport of a system.
Enable PWM function in BIOS settings after installation.
Product design and specifications may be revised to improve quality and performance.
Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
Liquid metal thermal grease unlike the normal thermal grease it contains electrical conductivity and causes aluminum cooler to rust therefore please avoid using it. Corrosion and short circuits caused by using aluminum cooler are users" responsibility, so please read this carefully before using. (EX: Liquid Pro, Liquid Ultra etcs)