• PRODUCTS

CNPS2X
Mini-ITX CPU Cooler
120W powerful cooling
Tiny 120W class cooler applied the DTH, S bending technology and the optimal heat dissipation design.
Emit the air straight from the fan to the mother board through down blowing design,
it cools down not only the CPU but also the components around it.
 
A : Regular heatsink heat transfer
B : FHS(Flower Heat Sink) type heatsink
transfers heat efficiently.
 
DTH technology applied
Direct Touch Heatpipe (DTH) Base technology transfers the CPU’s
heat directly to heatpipes, thereby minimizing heat resistance and maximizing cooling performance.
 
'S' bending technology applied
Connect all the fins on one heatpipe using ’S’ bending technology to maximize the cooling effect.
 
Optimized fin structure
Fin design that is optimized for heat dissipation via a small, lightweight for most efficient cooling performance.
 
80mm PWM fan
Equipped with a low-noise 80mm PWM fan, user can control the RPM to achieve high performance
/ low noise depending on the CPU temperature.
 
Light compact size
High-performance, ultra-compact, light weighted. It can be mounted in all cases including mini-ITX case.
 
ZM-STG2M provided
The high performance super thermal grease ZM-STG2M
maximizes heat transfer from the CPU to the base of CNPS2X for intensified cooling performance.
 
Wide compatibility
CNPS2X accommodates a broad range of sockets.
- Intel LGA115X
- AMD AM3+/AM3/FM2+/FM2/AM2+/AM2
 
Manufacturer Socket CPU CPU Compatibility
Intel 1156 Core i7 Supports all speeds
Core i5
Core I3
1155 Core i7 Supports all speeds
Core i5
Core i3
1151 Xeon E3 Supports all speeds
Core i7
Core i5
Core i3
1150 Xeon E3 Supports all speeds
Core i7
Core i5
Core i3
AMD AM4 Ryzen 7 Supports all speeds
(Socket AM4 mounting kit Inquiry)
Ryzen 5
Ryzen 3
A12
A10
A8
AM3+ FX Supports all speeds
AM3 PhenomⅡ X6 Supports all speeds
PhenomⅡ X4
PhenomⅡ X3
Sempron
AthlonⅡ X3
AthlonⅡ X2
FM2+ A10 Supports all speeds
A8
A6
Athlon X4
FM2 A10 Supports all speeds
A8
A6
A4
AM2+ Phenom X3 Supports all speeds
AM2 Athlon64 X2 Supports all speeds
 
 
 
Dimensions 84(L) x 84(W) x 27(H)mm
Weight 83g
Materials Pure Copper & Aluminum
Dimensions 80mm
Bearing Type Long Life Bearing
Adjust Fan Speed

PWM (Pulse Width Modulation)

Fan Speed 1,500 ~ 2,600 rpm ± 10%
Noise Level 17.4 ~ 22.7 dBA ± 10%
Rate Voltage 12V
 
 
Color Gray
Capacity 1g
Temperature Stability -40°C ~ +150°C (-40℉ ~ +302℉)
 
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
 
 
Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention.
 
To prevent possible injuries, gloves must be worn while handling this product.
 
Excessive force exerted on the fan may cause damage to the fan and/or system.
 
Use and keep product away from reach of children and pets.
 
Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
 
Zalman is not responsible for any damages caused by overclocking.
 
During transportation of the system, the cooler must be removed.
 
Zalman is not responsible for any damages that occur during the transport of a system.
 
Product design and specifi cations may be revised to improve quality and performance.
Liquid metal thermal grease unlike the normal thermal grease it contains electrical conductivity and causes aluminum cooler to rust therefore please avoid using it. Corrosion and short circuits caused by using aluminum cooler are users' responsibility, so please read this carefully before using. (EX: Liquid Pro, Liquid Ultra etcs)