Socket CPU CPU Compatibility

Intel 1156(1) Core i7 Supports all speeds Core i5 Core i3 775 Core 2 Quad Supports all speeds Core 2 Duo Pentium Dual Core Pentium D Pentium 4 Prescott Up to 540 Cedar Mill Up to 650 Celeron D Supports all speeds AMD AM2 Athlon 64 FX Up to 53 Athlon 64 X2 Up to 5600+ Athlon 64 Supports all speeds Sempron 940 Athlon 64 FX Up to 53 939 Athlon 64 FX Up to 53 Athlon 64 X2 Up to 5600+ Athlon 64 Supports all speeds 754 Athlon 64 Supports all speeds Sempron

Note(1) To use the CNPS7000C series coolers on socket 1156, ZM-CS5B must be purchased separately.

No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 55mm radius from the center of the CPU.

Dimensions 109(L) x 107(W) x 63(H) mm Weight(1) 750g Base Material Pure Copper Dissipation Area 2,890㎠

Bearing Type 2 Ball-Bearing Speed(2) 1,350rpm ± 10% ~ 2,400rpm ± 10% Noise Level(3) 17.0dBA ± 10% ~ 24.0dBA ± 10%

(1) The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Socket AM2/754/939/940. Special care     should be taken when moving a computer equipped with a cooler which exceeds the relevant weight limit. Zalman is not     responsible for any damage that occur while moving a computer.

(2) The fan operates at 2,650rpm(27.5dBA±10%) if directly connected to the motherboard’s power connector without the use of     FAN MATE 2.

(3) Measured 1m distance away from source.

Dimensions : 70(L) x 26(W) x 26(H) mm Weight : 20g Output Voltage : 5V ~ 11V ± 2% Allowable Power : 6W or lower Connector : 3-Pin

Does not generate noise or vibration in Silent Mode. Pure copper base materials ensure excellent heat dissipation. Compatible with single and dual core CPUs for Intel Socket 775 and AMD Sockets AM2/754/939/940. 92mm fan inside the heatsink maximizes airflow. Adjustable fan speed controller(FAN MATE 2) enables control of noise and fan performance.

Common Components - Cooler (CNPS7000C-Cu LED) - Thermal Grease - Clip A - Installation Bolt (4 bolts) - Clip B - Clip Lever - Fan Speed Controller (FAN MATE 2) - Cable for FAN MATE 2 - Double-Sided Tape (for FAN MATE 2 Attachment) - User’s Manual (in English and Korean)   Components for Intel Socket 775 - Clip Support for Socket 775 - Backplate for Socket 775 - Clip Support Fixing Bolt (4 bolts)   Component for AMD Socket AM2+/AM2/754/939/940 * No additional components

Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.

The computer system may automatically shut down when booting the computer after the system monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully turn the Speed Control Knob in the clockwise direction before rebooting to disable the 'CPU Fan Detected' option in BIOS, or set the CPU fan's rotational speed to 1,350rpm or lower in the system monitoring program.   Some motherboards fail to boot if the rotational speed of the CPU fan is below a certain rpm. However, booting can be possible even at low fan rpm if the BIOS settings are updated. For more information on updating the BIOS, please refer to the website of the motherboard's manufacturer. There are motherboards which fail to detect the rpm while operating the cooler in Silent Mode, but this does not affect computing performance. Excessive force exerted on the fan may damage the fan, resulting in damage to the system. Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.